Mounting Platform Installation

Cargo space disassembly and preparation

Lift the false floor panel and remove the retaining cord cover. Remove the M6 bolt from the retaining cord plate.

Remove the false floor panel assembly (this has hidden clips, pull upward with moderate force).

Remove the M6 bolt from each side false floor panel.

Remove both side false floor panels (these have a hidden clip, pull upward with moderate force).

Remove the plastic trim panel that is located under the false floor panel (this has hidden clips, pull upward with moderate force).

This image shows the clips mounted in the underside of the panel.

Remove the M10 bolts and floor braces in the floor cavity.

The cargo space is now ready for the installation of the sub frame and platform.

Subframe and platform installation
7 seat model shown, instructions still apply to 5 seat model

The subframe mounts to the vehicle using the 6 genuine captive nuts in the floor.

Position the subframe in the cargo space, aligning the steel brackets with the 6 genuine captive nuts. Using the 6x M10 bolts removed during the preparation stage, start each bolt (do not tighten).

Align the subframe using the 2x M6 captive nuts and the cross brace as a reference (shown in this image). Once this is evenly aligned on both sides, tighten the 6x M10 bolts.

1. Once the subframe is secured, carefully position the platform onto the subframe.
2. Align the mounting holes in the platform with the T-nuts in the subframe.
3. Start all 12 of the stainless steel countersunk M6 bolts (do not tighten).
4. Check the alignment of the platform to the genuine trim panels, ensuring it is an even fit throughout. If it is not even or a large gap is present the platform will need to be removed and the subframe adjusted accordingly.
5. Once the alignment and fit is correct, tighten all of the stainless steel countersunk M6 bolts.​